Many users who are not 3d printer industry users always encounter a variety of problems when using, often because of their lack of understanding of 3d printers will be in trouble in the process of use, where in which the material can not stick to the platform is a common problem used by users, Today for you to summarize some of the problem swhat when the treatment, interested friends can understand.We summarize the following problems that arise during the use of many unprofessional users.
Our 3d printer to be placed on a desktop, the print platform on the desktop must be horizontal, otherwise it will not work, please confirm that your platform is placed level. If the platform is not level, one side of the platform will be closer to the print nozzle and the other side will be too far away. This way the child cannot print out the finished product. It will only make you waste the printed material. After confirming the horizontal placement of the platform, adjust the position of the print nozzle so that it is not far from the platform.In a far and near balance position to print the finished product successfully.
Many people in the printing process will speed up the first layer of printing, such as the first layer of printing too fast will cause the material not enough time to stick to the platform, should reduce the first layer of printing speed, waiting for the first layer of material cooling successfully adheretothed to the platform. When there is a problem with the temperature or cooling settings, the material shrinks when the temperature decreases. As the material cools, it is out of the platform. In addition to the above reasons, such as the song 3d printer platform is not clean, the same will lead to material sticktos to the platform situation. Clean the platform with water or alcohol before printing, make sure there is no dust and keep the platform clean.As long as we pay attention to the use of 3d printing method, its use will change many details of our lives.