Do you know the precautions for the operation of the 3D scanner?

The 3d scanner equipment is high-tech equipment, so its cost is relatively high, so we are using a 3d scanner.

The 3d scanner equipment is high-tech equipment, so its cost is relatively high, so we are using a 3d scanner

The first is to use the environment, the working state of the 3d scanner must be in a relatively stable environment, the most important point is to ensure that the outside light will not produce film and television for the scanner. Also make sure that the scanner remains absolutely stationary while scanning, which means that the scanner cannot be displaced relative to the scanned object.

Do you know the precautions for the operation of the 3D scanner?

The 3d scanner must be calibrated before use. Because some 3d scanners produced by merchants require a pre-calibration mode, some require the user to calibrate the system itself. Calibration is a very important step, otherwise it is likely that the final data is not accurate.
 
Prepare the work in front of the sweep, because the scanner acquires the data on the surface of the object, so it is necessary to determine the surface of the object before scanning, and it needs to be processed. The transparent, translucent and reflective materials need to be processed. Pay attention to the uniformity of the imaging agent during processing, otherwise it will affect the scanning of the 3d scanner.
 
Data processing, after obtaining the surface data, its export and post-processing is also a crucial step. After determining the use of the data, the appropriate output parameters are set in the scanning software for later processing.

Leave a Reply

Your email address will not be published. Required fields are marked *